TRUCKS

Independent

Independent started in 1978 in San Francisco and Santa Cruz. History, the name, the cross controversy, every Stage, sizes and where they're made.

1978founded
United Statesorigin
Santa Cruz and San Francisco, Californiaheadquarters

Photo: Methem (Mikko J. Putkonen) · CC BY 4.0

Updated November 13, 2026 · 14min read

Independent is the best-known skateboard truck brand in the world. A lot of people just call it Indy, and for decades its logo, a red and black cross, has been on shirts, stickers and tattoos of skaters who have never bought another brand of trucks in their lives. It started in 1978 from an idea that didn’t work, its founders created a magazine to advertise it and it’s still made in the United States.

Here is the full story of Independent, why it’s called that, what happened with the cross, how the trucks have changed from the Stage I to the Stage 11, what size you need and how they differ from Thunder, Venture and Ace.

Before Independent: trucks that turned or trucks that held up

In the mid 70s skateboarding was going through its first big boom thanks to urethane wheels, but trucks weren’t up to it. The best sellers were Tracker, wide, tough and easy to adjust, but they barely turned; Bennett, which turned very well but whose baseplates snapped; and Gullwing, with a split-axle design that almost nobody liked. Skaters summed it up like this: one broke and the other didn’t turn.

In San Francisco, Fausto Vitello and Eric Swenson had set up a small foundry company, Ermico Enterprises, with some welders, some drills and a borrowed lathe. Vitello was born in Buenos Aires in 1946 and arrived in San Francisco at age 9; he learned English listening to Giants baseball games on the radio. Swenson was the designer: he didn’t skate, he liked punk and hard rock, played guitar and fixed motorcycles.

Their first truck was the Stroker, a design full of springs that cost almost $27 when a normal truck went for between $6 and $16. Then they made the Rebound, with two kingpins, which was distributed by NHS, the Santa Cruz company of Richard Novak and Jay Shuirman (the one behind Santa Cruz Skateboards).

1978: a truck with a name that didn’t fit

NHS and Ermico started working together on an idea from the skater John Hutson: a truck with independent suspension for each wheel. They made four or five prototypes and ended up with something very different, a simple, sturdy truck that combined the good turn of a Bennett with the strength and easy adjustment of a Tracker. The independent suspension fell by the wayside, but the name stayed: they called it The Independent.

The four founding partners were Fausto Vitello, Eric Swenson, Richard Novak and Jay Shuirman. The first truck, the Stage I, came out in 1978 in two sizes, 88 and 109 mm, and it worked from the start: the brand says that in its first year it sold half of all the trucks on the market.

Two details from those years help explain the brand:

  • When Tracker answered with a white plastic protector for the axle, Independent put out the Grindmaster Device, a sort of parody of Tracker’s that also sold very well.
  • From the beginning, Independent would swap your trucks if you weren’t happy with them.

1981: the magazine that was born to sell trucks

In the early 80s skateboarding crashed again: skateparks closed, brands went under and shops stopped ordering gear. Vitello and Swenson decided that if nobody was talking about skateboarding, they would. In January 1981 they launched Thrasher, with Kevin Thatcher as its first editor, to keep the scene alive and, along the way, advertise Independent.

Thrasher ended up being the most influential skate magazine in the world. Its slogan “Skate and Destroy” even led another magazine, Transworld Skateboarding, to be born with the opposite slogan: “Skate and Create”. Vitello’s company, High Speed Productions, later put out Slap and Juxtapoz, and Vitello was also involved in the distributor Deluxe (Real, Anti Hero, Spitfire, Thunder). He died in 2006, and his son Tony took over Thrasher. Eric Swenson died in 2011.

Jim Phillips’ cross and why it was pulled

The cross logo was drawn by Jim Phillips, the Santa Cruz artist, the same one behind the Screaming Hand. He has said himself that he was “playing around” with the iron cross or the Maltese cross and rounded off the corners. His bosses thought it looked “too Nazi”. Phillips found a photo of Pope John Paul II with a similar cross, showed it to them and the argument was over.

That kind of cross was common among surfers and bikers in Southern California in the 70s, and it came into skateboarding with that meaning. But the resemblance to the iron cross, a symbol associated with Nazi Germany, meant the brand drew criticism for decades. Around 2021-2022 Independent took the cross off the truck baseplates and launched a round logo with the word Independent and the slogan Ride the Best. Since 2025 the cross has been seen again on some products and posts, without the brand officially announcing its return.

The brand’s other historic slogan is Ride the Best, Fuck the Rest, tied to the ads of the 80s and to skaters like Steve Olson. The current one is Built to Grind, which is also the title of the book the brand published in 2004 for its 25th anniversary.

From Stage I to Stage 11: how the trucks have changed

Independent calls each generation of its trucks a Stage. These are the most important changes:

StageYearWhat changed
I1978The first, in 88 and 109 mm
II1979Reinforced baseplates and extra-wide sizes, 151 and 169 mm
III1982Reinforced base and hook, wider hanger
IVMid 80sNew hanger. Reissued today
V1986Hanger with a hollow and a “wing”, with ideas from Lance Mountain and Steve Caballero
VI1991Less metal on the top of the hanger
VII1993Baseplate holes moved toward the center, the pattern that ended up as the standard
VIII1997Changes to the baseplate and the kingpin
IX2003The first designed on a computer. Lower (53.5 mm), but some baseplates cracked
X2009Sturdier, deeper baseplate
XI (11)Early 2010sBack to the geometry of Stages V to VII, at 55 mm tall

Some skaters are very loyal to one specific generation. The best-known case is Geoff Rowley, who has skated Stage VII since 2005, and original Stage VII and VIII trucks sell for a lot among collectors.

Current Independent trucks

ModelHeightWhat it has
Stage 11 Standard55 mmCast, solid axle and kingpin. The classic
Stage 11 Hollow55 mmHollow axle and kingpin: same geometry, less weight
Stage 11 Forged Hollow53.5 mmForged baseplate, tougher, hollow axle
Stage 11 Forged Titanium53.5 mmForged baseplate and titanium axle. Around 15% lighter
Mid52 mmLower, with an inverted kingpin so it doesn’t catch
Stage 455 mmReissue of the 80s one, with a quick turn

The hanger is aluminum and the trucks come with fairly hard bushings, which soften up after a few days of use. With the Standard you can run wheels up to about 56 mm without risers, and with the Forged Titanium, up to about 59 mm.

If you want to see each model in detail, we have a model-by-model guide to Independent trucks.

Independent truck sizes

The number on each Independent truck (129, 139, 144…) is the hanger width in millimeters. The whole truck, with the wheels, is wider. This is the size that fits your deck width:

Independent truckDeck width
1297.5” to 7.8”
1397.8” to 8.2”
1448.25” to 8.375”
1498.4” to 8.6”
1598.6” to 9”
1699” to 9.5”

The Stage 4 uses a different numbering (136, 146, 151, 166), so in that case look at the total width of the truck and not at the number.

Where Independent trucks are made

Independent is one of the few big truck brands still manufacturing in the United States. They’re cast and assembled by Ermico Enterprises, the company of Vitello and Swenson, in the San Francisco Bay Area, just like in 1978. The brand belongs to NHS, Inc., of Santa Cruz, which distributes it worldwide alongside Santa Cruz Skateboards, Creature, Krux, OJ, Ricta, Bronson or Slime Balls. Independent has never been sold to an outside group.

Independent vs Thunder, Venture and Ace

These are the four most common truck brands in a skate shop, and the easiest difference to measure is height:

TruckHeight
Independent Stage 1155 mm
Independent Mid52 mm
Thunder (Team)50 to 53 mm
Venture Hi53.5 mm
Venture Lo48 mm
Ace Classic and AF153 mm

In practice:

  • Independent is the most stable and sturdy, and also the heaviest. It turns progressively and holds up a lot. It’s the “do-it-all” truck, and the favorite for bowl, ramp and transition.
  • Thunder is lower and lighter, turns fast and is very popular for technical street.
  • Venture sits in the middle, with harder stock bushings.
  • Ace turns a lot more than the others and is liked for bowl and pool. It was created by Joey Tershay, who had worked at the foundry where Independent, Thunder and Venture were made, from an old Independent design.

If you want to see them all compared, we have a comparison of the best skateboard trucks.

The Independent team

Many of the most important skaters of each era have come through Independent: Steve Olson, Duane Peters, Steve Alba, Steve Caballero, Christian Hosoi, Tommy Guerrero, Mark Gonzales, Jeff Grosso, Eric Dressen, Ray Barbee, Danny Way, Tim Brauch or Andrew Reynolds. In the 2000s, Andrew Reynolds, Eric Koston, Chris Haslam and Geoff Rowley had pro trucks, and in January 2013 Tony Hawk joined.

The current team has a lot of European and South American weight: Kevin Bækkel (Norway, with a pro truck since 2025), Aurélien Giraud and Victor Pellegrin (France), Marius Syvanen (Finland), Milton Martinez (Argentina), Pedro and Fabiana Delfino (Brazil), plus Chris Joslin, Greyson Fletcher, Wes Kremer, Evan Smith and Peter Hewitt. Mark Gonzales and Elijah Berle put out signature trucks in 2025.

Who are Independent trucks for?

  • If you’re starting out: a Stage 11 Standard is a safe bet. It’s stable, holds up to almost anything and you’ll find it in any shop. To set it up right, check our guide to choosing trucks.
  • If you skate bowl, ramp or transition: it’s probably the most used truck in that terrain.
  • If you do a lot of technical street and want a low, light truck, try a Mid or a Thunder too.
  • If you’re light or a kid: swap the stock bushings for softer ones, or the truck will be hard to turn.

If you’re interested in the sister brand, here’s the profile of Santa Cruz Skateboards, which shares an owner and an artist with Independent.

Frequently asked questions

Why is it called Independent?

Because the original idea was a truck with independent suspension for each wheel. After four or five prototypes, the truck that came out in 1978 no longer had that suspension, but it kept the name: The Independent.

Who owns Independent Trucks?

NHS, Inc., the Santa Cruz, California company that also owns Santa Cruz Skateboards, Creature, OJ, Ricta or Krux, and distributes the brand worldwide. Independent has never been sold: it started as a joint project between NHS and Ermico, the foundry of Fausto Vitello and Eric Swenson.

Where are Independent trucks made?

In the United States. They're cast and assembled by Ermico Enterprises in the San Francisco Bay Area, the same company that has been making them since 1978.

What size Independent trucks do I need?

Pick the truck by your deck width: 129 for decks of about 7.5-7.8 inches, 139 for 7.8-8.2, 144 for 8.25-8.375, 149 for 8.4-8.6, 159 for 8.6-9 and 169 for 9 inches or more. The number is the hanger width in millimeters.

What's the difference between Independent Standard, Hollow and Forged Titanium?

All three have the same Stage 11 geometry. The Hollow has a hollow axle and kingpin to weigh less. The Forged has a forged baseplate and is a bit lower. The Forged Titanium adds a solid titanium axle: it's the lightest (around 15% less) and the most expensive.

Independent or Thunder?

Independent is taller (55 mm versus about 50-53 mm for Thunder), heavier and more stable. Thunder is lower and lighter, and turns faster, which is why people who skate a lot of technical street like it. It depends on what you skate and what you like to feel under your feet.

Are Independent trucks good for beginners?

Yes. They are tough, stable and easy to adjust. The stock bushings are a bit hard at first and need a few days of use; if you're light, you can swap them for softer ones.

How many Independent Stages are there?

Eleven. From the Stage I of 1978 to the current Stage XI, launched in the early 2010s. The brand also reissues the Stage 4 from the mid 80s.

Publicidad