Skateboard Truck Size Calculator (brand equivalents)
Find the exact truck width your deck needs and compare the equivalent size across Independent, Thunder, Venture, Ace, Krux, Royal and Tensor.
Your setup
Every truck brand names its sizes its own way: Independent uses numeric codes (129, 149, 169), Thunder uses other codes that are not measurements either (145, 147, 148), Venture and Tensor name the size after the hanger width in inches (5.0, 5.2, 5.6) and Krux after the axle width (8, 8.25, 8.5). Ending up with a truck 2 mm narrower or wider than it should be is a classic, and you really feel it when you skate.
This calculator does two things: it tells you the EXACT size you need in any of the 8 brands we cover (Independent, Thunder, Venture, Ace AF1, Ace Classic, Krux, Royal and Tensor), and it warns you if you’ll need a riser because of the wheel diameter you run.
What you need to use it
Just three things:
- Deck width in inches (check the sticker on the nose or the manufacturer’s site).
- Wheel diameter in millimeters (it’s printed on the side).
- Preferred brand if you have one. It’s optional.
Why each brand uses different names
There is no standard. Independent and Thunder use catalog numbers that are not measurements: an Independent 139 and a Thunder 147 both have an 8.0″ axle. Venture and Tensor name the size after the hanger width in inches (a Venture 5.2 is about 8.0″ across the whole axle). Ace uses two-digit numbers (33, 44, 55) that are not even the same width in the Classic and AF1 lines. Krux, on the other hand, simply uses the axle width (8, 8.25, 8.5).
Result: today several different conventions live side by side, and you need a calculator like this one to avoid mistakes.
How a truck is measured
Three important measurements:
- Hanger width: the aluminum piece where the bushings go. The one Thunder and most brands quote.
- Axle width: the metal axle that sticks out, where the wheel mounts. This is the one that has to match the deck width.
- Height (low / mid / high): how much distance the axle leaves between the deck and the ground. The bigger the wheels, the higher the truck needs to be to avoid wheelbite (the wheel touching the deck when turning).
Quick equivalence (without the calculator)
| Deck width | Independent | Thunder | Venture | Krux | Ace AF1 |
|---|---|---|---|---|---|
| 7.75″ | 129 | 145 | 5.0 | 7.6 | 22 |
| 8.0″ | 139 | 147 | 5.2 | 8 | 33 |
| 8.25″ | 144 | 148 | 5.6 | 8.25 | 44 |
| 8.5″ | 149 | 149 | 5.8 | 8.5 | 55 |
| 8.75″ | 159 | 151 | 6.1 | 8.5 / 9 | 60 |
For any in-between size or the rest of the brands, use the calculator. The matching isn’t always exact and it’s worth knowing whether you’re a hair narrower (more agile) or a hair wider (more stable).
Riser or not, depending on your wheel
| Wheel diameter | Recommended riser |
|---|---|
| Up to 52 mm | No riser. Low profile, pure street feel. |
| 53 - 55 mm | No riser, unless the bushings are very soft. |
| 56 - 57 mm | Optional 1/8″ to avoid wheelbite. |
| 58 - 60 mm | 1/8″ recommended. |
| Over 60 mm | 1/4″ essential (cruising, soft wheels). |
A riser is a plastic or urethane piece that goes between the deck and the truck. It doesn’t only prevent wheelbite, it also cushions landings and reduces vibration from the asphalt. If your setup is pure cruising, add a riser even if you don’t need it for wheelbite. You’ll be glad you did.
Common mistakes when choosing trucks
- Buying the width the brand says without checking the real axle. It happens with Independent: the “139” sounds like the classic one, but its axle is 8.00″, not 8.25″.
- Ignoring truck weight. Hollow vs solid changes 70-100 g per truck. For pure flip tricks, hollow. For bowl/cruising, solid.
- Buying bushings that are too soft for your weight. Stock bushings are calibrated for 65-75 kg. If you weigh more, you’ll feel wobbly in the turns.
- Skipping the riser when you run 56 mm+. Wheelbite throws you to the ground at the silliest moment. 1/8″ costs a few cents.
Frequently asked questions
Does the truck brand matter?
Yes. The difference between an Independent Stage 11 and a cheap truck isn’t only price: the forged aluminum on Indys survives falls that bend the cheap ones. For occasional use any truck will do; for skating 3-4 sessions a week, the brand matters.
How long do trucks last?
Good ones (Independent, Thunder, Venture, Ace) last years, the hangers are practically indestructible. What wears out is the bushings (every 1-2 years depending on use) and the kingpins if you overdo grinds.
Can I mix brands (e.g. Indy + Thunder)?
Yes, but the feel changes between the front and back truck. Most skaters run both the same for symmetry. If you try a mix, put the more stable brand (Independent) in the back and the more agile one (Thunder) in the front.
Are Independent trucks the best for everything?
For street + classic park, yes. For pure bowl, many prefer Ace or Theeve for wider turning. For cruising, Carver or surfskate-specific trucks. Independent is the “8.0″” of trucks: rarely the worst place to be.
Does height (low/mid/high) matter?
Yes. Low (Indy “Hollow Lows”, Thunder Lights) works better for flips. High (standard Indy “Stage 11”) for big wheels and bowl. Mid is the balance for technical street with 53-55 mm wheels.
Keep going
Still fine-tuning your setup? Check these related guides:
- How to choose a skateboard deck: to get the base right.
- How to choose skateboard wheels: diameter and hardness explained.
- Wheel calculator: what hardness/diameter your style asks for.
- Complete guide to Independent trucks: model by model of the reference brand.