Skateboard Builder: build a complete skateboard
Build your complete skateboard and check that everything fits: which truck size from each brand goes with your deck, which wheels fit without wheelbite, whether you need risers and which bolts to buy.
Choose your deck width, where you’ll skate, the truck brand and height, and the wheel size. The builder tells you the exact truck size you need in that brand, whether the wheels will rub against the deck (wheelbite), whether you need risers and what bolt length to buy. Below you get the shopping list with everything you need.
You can copy the link to your setup and send it to anyone: when they open it, they’ll see exactly the same parts.
How it checks
- Trucks: each brand names its sizes its own way (Independent 144, Thunder 148, Venture 5.6…). The builder looks for the size from that brand whose axle measures the same as your deck. If a brand doesn’t make that width, it warns you.
- Wheelbite: it crosses the wheel diameter with the real axle height in millimeters. With low trucks (46-49 mm) wheels up to 52 mm fit without a riser; with mid trucks (50-53 mm), up to 54-56 mm; with high trucks, up to 56 mm or a little more.
- Risers and bolts: if a riser is needed, it tells you the thickness (1/8″, 1/4″) and the bolt length that goes with it.
- Style: if you choose something that doesn’t usually fit how you skate (for example 58 mm wheels for street), it flags it, but you can leave it as is if you prefer.
The checks assume trucks tightened normally. If you like to run them very loose, go up one riser step.
The parts of a complete skateboard
A complete skateboard takes seven things: deck, grip tape, two trucks, four wheels, eight bearings, hardware and, if needed, risers. Bearings and grip tape are standard (608 and 9″ x 33″), so there’s nothing to measure. What you do need to match is deck, trucks and wheels with each other, and that’s what this tool does.
If it’s your first time building one, you have the step by step in how to build a skateboard.
Frequently asked questions
Why does the truck have to be the same width as the deck?
Because if it’s wider, the wheels stick out and you trip over them; if it’s narrower, the deck loses stability. Ideally they match or are no more than 1/8″ (about 3 mm) apart.
Which truck brand is best?
All the ones in the builder are serious brands. They mainly differ in height and in how they turn: Independent is high and turns a lot, Thunder and Venture have low versions for street, Ace and Tensor sit in the middle. You have them compared in the guide on how to choose trucks.
What if it says I need a riser?
Nothing serious: it’s a plastic plate a few millimeters thick that goes between the truck and the deck. You just have to buy slightly longer bolts. If you’d rather not use one, choose smaller wheels or higher trucks.
Are the purchase links affiliate links?
Yes. If you buy through them, Fillow earns a small commission and it doesn’t cost you more. The recommendations don’t depend on that: the builder doesn’t choose specific products, only sizes.
Keep going
- Skateboard deck sizes: if you still don’t know which width is yours.
- Truck sizes by brand: all the sizes of each brand.
- Wheel sizes and hardness: diameters, hardness and risers.
- Skateboard size calculator: your width based on foot, height and style.